Before You Begin: What to Know About the Harrison Sconce
The Harrison Sconce is an asymmetric fixture designed for hardwire installation. It comes with two hand-blown glass covers that may have slight bubbles or waviness — that's normal and part of the character. The fixture is made to order, so allow time for construction, testing, and shipping before you start your project.
You'll need to choose your orientation (left or right) and finish (raw brass or mirror-like chrome) before installation, as the orientation determines how the glass arms sit on the wall.
Harrison Sconce Specifications
- Harrison Sconce: Measurements: 15" W, 12" H, 7" D; glass has a 5" diameter; wall plate measures 5" diameter, 1" D The wall plate is compact (5" diameter), so you need a standard junction box. The 7" depth means the sconce protrudes enough for hallways or beside mirrors.
Harrison Sconce - Harrison Sconce: Max wattage: 60W per bulb; recommended bulb type: E12/candelabra base bulbs Use only candelabra-base bulbs up to 60W. LED or incandescent both work, but stay within the wattage limit to avoid overheating.
- Harrison Sconce: For hardwire installation. This fixture does not plug into an outlet. You must connect it to a wall switch or existing wiring. If you're not comfortable with electrical work, hire a licensed electrician.
Step-by-Step Installation
- 1. Turn Off Power: At the circuit breaker, shut off power to the wall switch or junction box where you'll install the sconce. Confirm with a voltage tester.
- 2. Prepare the Junction Box: Ensure your electrical box is securely mounted and can support the sconce weight. The wall plate is 5" diameter, so the box should be centered behind it.
- 3. Connect Wiring: Match the fixture wires to your house wiring: black (hot) to black, white (neutral) to white, and green or bare copper (ground) to the ground wire or screw. Use wire nuts and electrical tape.
- 4. Mount the Wall Plate: Attach the wall plate to the junction box using the provided screws. Make sure it's level.
- 5. Attach the Glass Covers: Screw the hand-blown glass covers into the sockets. Handle gently — the glass is delicate and each piece is unique. Tighten until snug, but don't overtighten.
- 6. Install Bulbs: Insert E12 candelabra-base bulbs (max 60W each). For the best look, choose bulbs that complement the glass — clear glass works well with clear bulbs, while white glass suits frosted or vintage-style bulbs.
- 7. Restore Power and Test: Turn the breaker back on and test the switch. If the light doesn't work, double-check your wiring connections.
Choosing the Right Orientation
The Harrison Sconce is available in left or right orientation. The orientation refers to which side the longer arm extends. Before ordering, visualize where the sconce will go: a left orientation works well when the sconce is on the right side of a doorway or mirror, and vice versa. You can also choose between clear or glossy white glass to match your decor.
Available Variants at a Glance
- Harrison Sconce: Brass / White Glass / Left Orientation Brass finish with white glass, arm extends left. Good for warm-toned rooms.
- Harrison Sconce: Chrome / Clear Glass / Right Orientation Chrome finish with clear glass, arm extends right. Works in modern or cool-toned spaces.
- Harrison Sconce: Additional variants: Brass or Chrome, white or clear glass, left or right orientation — 8 total options. You can customize the look to fit your space exactly. All variants follow the same installation process.
Care and Handling Notes
Because the glass covers are hand-blown, they may have slight bubbles or waviness. This is not a defect — it's a sign of craftsmanship. Clean the glass with a soft, dry cloth; avoid abrasive cleaners that could scratch the finish. The brass or chrome finish can be wiped with a damp cloth and dried immediately to prevent water spots.
The fixture is made to order, so it's a good idea to keep your order details handy in case you need to reference the finish or orientation later.
